Mitsubishi Electronics DX-TL5000U Copy the data, Setting the motion detection, Setting the timer recording, Timer recording is executed and completed, Searching the recorded data, The search is completed and the search result is displayed Playback the search result

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning
11
Copy the data
•Setting the copy device.
See “ Add/Remove HDD Device” or “ Add/
Remove DVD/CD Drive” on pages 80-82.
•Setting the copy function.
See “ Copy Data to Copy 1 Drive” or “ Copy
Data to Copy 2 Drive” on pages 44, 45.
Setting the motion detection
•Selecting the camera number.
•Setting the detection areas.
•Setting the sensitivity.
•Setting the minimum number of dots for starting the
motion detection operation.
•Setting the detection interval.
See “Motion Det” on pages 58, 59.
Setting the timer recording
• Setting the normal/alarm recording or pre-alarm
recording.
• Setting the recording rate/picture grade for normal
recording.
• Setting the recording rate/picture grade for alarm
recording.
• Setting the motion detection recording.
• Selecting the camera selection during the alarm
recording and trigger for alarm recording.
• Setting the alarm recording time.
• Setting the pre-alarm recording time.
• Setting the PTZ camera preset.
See “ Set Recording Pattern A
(Normal/Timer) to D (Timer)” on pages 51-
53.
• Setting the timer program.
• Setting the holiday.
• Selecting the timer program number.
• Making the timer recording settings.
• Selecting the day of the week.
• Selecting the start time.
• Selecting the end time.
• Selecting the program mode.
• Selecting the motion detection mode.
(• Selecting the special day of the week.)
See “Timer” on pages 56, 57.
Timer recording is executed and completed
See “ Warnings and their appropriate
countermeasures” on pages 114, 115.
Searching the recorded data
•Setting the device to be searched.
See “ Select Source Device” on page 42.
•Setting the alarm list search.
See “ Search by Alarm List” on page 100.
The search is completed and the search result
is displayed
Playback the search result
•Selecting the camera number to be played back.
See “ Multiplexer Setting” on pages 66, 67.
•Selecting the split/sequence screen.
See “ Multiplexer Setting” on pages 66, 67.
•Playback the recorded data.
See “ Basic playback” on page 98.
•Selecting the playback speed.
See “ Various playback functions” on pages
86, 87.