On Screen Display Setting
On Screen Information
This item is used to set the display mode and the location for the clock, triplex, and camera display on the monitor.
Setup Menu
4 System
6 On Screen Display Setting
1 
On Screen Information
(Clock)
step1. Select the display mode of the clock.
Mode 1:
Mode 2:
Mode 3: Does not display the clock.
step2. Select the desired clock location.
(Triplex)
step3. Select the display mode of the remaining capacity and the operational conditions such as playback, recording, alarm recording, and emergency recording.
Mode 1: Displays the operational condition of the unit and the warning display.
Mode 2: Displays the remaining capacity of the specified device, the operational condition of the unit, and the warning display.
Mode 3: Displays the remaining capacity of the specified device, the operational condition of the unit, the HDD being used for playback or recording. The warning display is not displayed.
Mode 4: Displays the warning display.
Mode 5: Displays nothing.
•The remaining capacity displayed is the capacity of the device specified in “Device” of “Low Memory Alarm
Setting.” (
See pages 60 and 61.)
•The remaining capacity is not displayed when the “Device” of “Low Memory Alarm Setting” is set to “Off.”
step4. Select the desired display location.
(Camera)
step5. Select the display mode of the camera information.
Number: Displays the camera number.
Title: Displays the title set in “Camera Title.” The title can be recorded along with the picture. None: Displays nothing.
step6. Select the desired display location.
•When display mode is set to “Title,” title is displayed on the top when display location is set to
Display mode example
|
| Camera title | ||
|
| (during single screen display) | ||
Recorder title |
| Warning | ||
|
|
|
|
|
| RECORDER1 | CAMERA1 | ALERT |
|
|
|
|
| |
|
|
| ||
REM 20% | REC [A] | PLAY [ID:1] COPY1 COPY2 |
| |
|
|
|
| |
| Specified device | Specified device | ||
|
| Operational conditions | ||
Remaining capacity of the specified device
Camera Title
This item is used to set the titles of each connected cam- era individually. When the display mode of the camera in- formation is set to “Title,” the title, showing the location of the camera, appears on the screen for an
•The camera titles can be input with a personal
computer by using the Web function. (
See page 107.)
•Up to 16 characters can be used for the title.
•The number of characters displayed on the screen is:
First 12 for the split 16 screen display All 16 for the other screen display
Setup Menu
4 System
6 On Screen Display Setting
steps 1, 2
2Camera Title
step 3
3Camera Title Overview
DCamera Title Overview
step1. Set the camera number for which the camera title is set.
step2. Input the camera title by using the characters shown on the bottom of the screen.
step3. Display the preview screen to check the settings you have set.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
69
