Changing playback intervals
Although, playback and reverse playback use the same interval as that for recording, it is possible to change the playback interval. This function is useful for
Press the + button during playback or reverse playback.
•Playback or reverse playback is made at a speed of 120 pps in total.
•Each time the – button is pressed, the playback speed is changed to a slower speed (up to 0.125 pps).
Press the – button during playback or reverse playback.
•Playback or reverse playback is made at a speed of 0.125 pps per camera.
•Each time the + button is pressed, the playback speed is changed to a faster speed (up to 120 pps). (For the picture recorded at the pps of more than 120, the playback speed may become slower when you press the + button.)
•Audio cannot be played back when changing the playback interval.
•Once the playback interval is changed, audio will not be played back even when returning the playback interval to the original value. To playback audio, stop playback once and then playback the picture again.
•Altering the playback interval to perform a quick playback of data with long recording rate may cause discrepancies between actual recording time and the recording time displayed on the screen.
Simultaneous playback during recording
The recording data can be played back simultaneously dur- ing recording.
•The playback picture may pause temporarily or the audio may be interrupted.
•Noise may appear on the picture during shuttle playback.
•Split screen display can be selected individually for recording and playback.
Playback the latest recorded contents
step1. Press the PAUSE (JUMP TO END) button when the unit is in stop mode.
•The still frame playback picture around the end point of the latest recording is displayed.
Triplex playback
This function is used to insert the playback picture of the desired camera number while displaying the picture supplied from the cameras.
step1. Press the TRIPLEX PB button during split screen display.
•The unit switches to triplex playback mode.
step2. Press the desired camera number button to be played back.
•The playback picture of the selected camera number appears.
•To switch the camera number of the playback picture, stop playback once and then follow the steps 1 and 2 above.
step3. Press the STOP button to stop playback.
•Triplex playback is available for either OUTPUT A or B.
•When the camera number button is not pressed for more than 3 seconds after pressing the TRIPLEX PB button, the triplex playback mode is cancelled.
•The picture of the camera number which is not displayed in the split screen display cannot be played back. In this case, the triplex playback mode is cancelled.
•Triplex playback mode is cancelled when the button other than camera number button is pressed.
•Triplex playback mode is cancelled when the different type of split screen is displayed. (The triplex playback mode is not cancelled when the newly displayed split screen contains the camera number of which picture being played back.)
•Triplex playback mode cannot be used during alarm display function is performed. When the alarm display is performed during triplex playback, triplex playback is cancelled and the normal camera picture appears when the alarm display is finished.
•The blue screen appears when the data of the selected camera number is not existed in the triplex playback picture.
•The clock which is displayed during triplex playback indicates the time and date of the playback picture.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
87
