Mitsubishi Electronics DX-TL5000U instruction manual Attaching or removing the HDD

Connections (continued)

Attaching or removing the HDD

Up to 3 HDDs can be mounted on this unit. Attaching, removing and replacing method of the HDDs are on the next page.

Precautions for attaching or removing the HDD

•Do not attach or remove the HDD unnecessarily. Attaching or removing the HDD of DX-TL5000U is intended to replace the faulty HDD or add the HDD when starting operation for the first time because of the structure of the connectors. It is not presumed to be used as a removable HDD.

•Make sure that the POWER button on the front panel and the MAIN switch on the rear panel are both turned OFF when attaching or removing the HDD. Wait at least 1 minute after turning off the power.

•Do not remove the top cover of the unit.

•When attaching multiple HDDs, attach in the order of HDD A, B, and C.

•Do not drop the HDD. Also do not put the metallic object such as a coin or a screw driver into the HDD tray.

•When a power failure occurs during recording, avoid adding, replacing or transporting the HDD as the recorded data may be erased. In this case, turn the power back on to boot up the unit normally with the HDD that was being used at the time of the power failure attached. Then add, replace, or transport the HDD.

•HDD is very delicate. Handle the HDD with care and follow the precautions below because even a small shock may damage the internal components of the HDD.

•Do not place the HDD on a desk or a table directly. Put a thick cushion under the HDD because even a small shock may damage the internal components of the HDD.

•Do not use an electric screwdriver. Vibrations and shocks caused by an electric screwdriver may damage the internal components of the HDD.

•When replacing the HDD, do not knock the HDD with other components such as the another HDD and the HDD tray.

•Do not knock the HDD with tools such as a driver when replacing the HDD.

•The following HDD has been tested and compatibility is ensured. This information is as of December 2004. Supply of this HDD may be stopped or it may be changed without notice by its manufacturer. Consult your dealer for the latest information or use of other HDDs. When you attach multiple HDDs, normally use the HDDs of the same capacity and the same model name.

<Hitachi Global Storage Technologies>

HDS722525VLSA80 (250 GB, S-ATA)

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

20