Mitsubishi Electronics DX-TL5000U 106, When you have selected cancel, If you have selected cancel

Communications by Web Browser (continued)

•Certain items cannot be selected depending on what the user authorization is.

•“Configuration” authorization can be used by only one user. From the time that a user logs in until that user logs out and gives up authorization, any other user that logs in is regarded as a user who does not have “Configuration” authority.

•“Playback” authorization can only be used by one user. From the time that a user logs in until that user logs out and gives up authorization, any other user that logs in is regarded as a user who does not have “Playback” authority.

2-2. (To change settings • • • )

Select “change” and left-click. The “[Change Confirmation]” screen will appear.

2-3. If you want to make the change, left-click “change.” If you want to cancel a change, left-click “cancel.”

2-4. (When you have selected “change” • • • )

The “[Completed]” screen will appear, so then left-click “User Registration.”

•The “[User Registration]” screen reappears.

2-5. (When you have selected “cancel” • • • )

•The “[User Registration]” screen reappears.

3-1. (To delete a registered user • • • )

Left-click on “remove” in the user ID that you want to delete in “Change authorities of users.”

•The “[Remove Confirmation]” screen appears.

3-2. If you want to delete it, left-click “remove.” If you don’t want to delete it, left-click “cancel.”

3-3. (If you have selected “remove” • • • )

The “[Completed]” screen will appear, so left-click “User Registration.”

•The “[User Registration]” screen reappears.

3-4. (If you have selected “cancel” • • • )

•The “[User Registration]” screen reappears.

4-1. (To register a new user • • • )

Enter the new user ID and new password in “Add New User.”

4-2. Refer to step 2-1, select the “Authority” desired and put a check mark.

•A user ID with the same name cannot be registered. The maximum number of characters that can be used in registering a password is 16. Both alphabet letters and numbers can be used with a distinction made between upper and lower case. You cannot use spaces.

4-3. If you want to make a new registration, left-click “register.” If you want to cancel a new registration, left- click “clear.”

4-4. (If you have selected “register” • • • )

It will be added to “Change authorities of users.” 4-5. (If you have selected “clear” • • • )

Clears the specified contents.

5-1. (To change the access method settings • • • )

Select the item to be changed in the “Access Mode Setup.”

•Use SSL for Web Access:

Sets the level of the encoding function (SSL). “No SSL”: Does not use the encoding function. “Menus only”: Uses the encoding function for the menus only.

“Menus + Pictures”: Uses the encoding function for the menus and pictures.

•SSL Port Settings:

Sets the port number used for SSL communication.

•Band-Width Limit:

Controls the band width of the communication. The available setting items are “No Limit,” “30Mbps,” “20Mbps,” “10Mbps,” “7.5Mbps,” “5Mbps,” “3Mbps,” “2Mbps,” “1Mbps,” “750kbps,” “500kbps,” “300kbps,” “200kbps,” “100kbps.”

•When you use SSL, the following message appears. Select “Yes” and then continue the operation.

•Even if the “Use SSL for Web Access” is set to “Menus + Pictures,” the following message may appear when displaying live or playback picture. It appears because the communication without encoding is used to download the ActiveX Control for displaying the picture.

This message appears every time live or playback picture is displayed. Select “Yes” when displaying the live or playback picture.

In this case, the key-shaped icon which shows the encode communication of the browser is not displayed, however, communications of both of the menu and picture are carried out with encoded.

5-2. Set the desired setting in “New Settings” and then select “change” and left-click.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

106