PERIPHERAL RECORDING DEVICE PLAYBACK
OTHERS
Description of problem | Please consult the following | Page |
The unit does not perform | • Is the LOCK indicator light on? | 12,62,63 |
playback. | • Has the data been erased? | 84 |
| • Is the correct playback device selected? | 42,98 |
The copy device dose not | • Has the recording medium been inserted correctly into the unit? | – |
respond. | • Is the unit currently in the middle of loading the recording | – |
| medium? |
|
| • Is the correct playback device selected? | 42,98 |
| • Has the recording medium's | – |
| • Is the power supply of peripheral recording device set ON? | – |
| • Is the termination set correctly? (SCSI device only.) | – |
| • Is the copy device registered in the <Add/Remove HDD Device> | 82 |
| and <Add/Remove DVD/CD Drive> (System Menu Memory)? |
|
The camera cannot be | • Is the camera to be controlled connected correctly? | 17 |
controlled via this unit. | • Is the <PTZ Setting> menu set correctly? | 77 |
|
|
|
The unit does not perform | • Is trigger for alarm recording of the camera number for which the | 53 |
the motion detection | motion detection function to be executed set to “External” ? |
|
function. | • Is the alarm recording rate of the camera number for which the | 52 |
| motion detection function is executed set to “– – |
|
| • Is the value set in “Motion Threshold” of the <Motion Det> menu | 58,59 |
| larger than that of “Motion Mask Settings” ? |
|
| • Is the detection area set correctly? | 58,59 |
|
|
|
The unit cannot be | • Is the <COM/LAN> menu set correctly ? | 74,75 |
controlled via the personal | • Are the unit and the personal computer connected correctly ? | 17 |
computer. | • Is there a defect in the connecting cable ? | – |
| • Is the proper connecting cable being used ? | 101 |
There is a camera number | • The screen of camera number with no video signal input | 65 |
with a blue screen during | appears blue even when setting for operation. |
|
split screen display. |
|
|
|
|
|
Button operation is not | • Is the POWER indicator flashing? | 12 |
working. | (The unit cannot be operated when the POWER indicator is |
|
| flashing.) |
|
| • Is the LOCK indicator light on? | 12,62,63 |
Cameras cannot be | • Is the menu screen being displayed? | – |
switched with the | Camera number buttons cannot be used when the menu screen |
|
camera number buttons. | is displayed. |
|
Menus cannot be set. | • When OUTPUT B is selected, the cursor of the mouse is | – |
| displayed, however, the menu screen is not displayed and |
|
| cannot be set. The menus can be set only when the OUTPUT A |
|
| is selected. |
|
|
|
|
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••Troubleshooting
