Mitsubishi Electronics DX-TL5000U instruction manual Output B Settings

Output B Settings

This item is used to set the camera number to be displayed in the split screen display on the monitor connected to OUTPUT B. And also used to set the sequential display settings and the switching time. Sequential display is the function to switch the selected displays automatically.

The selectable screen types are shown in the table on page 65.

Setup Menu

4 System

step 7

5 Multiplexer Setting

2 Output B Settings

steps 1, 2

1 Split 4 screen

1Split 4a screen

2Split 4b screen

3Split 4c screen

4Split 4d screen

2 Split 9 screen

1Split 9a screen

2Split 9b screen

3 Split 10 screen

1Split 10a screen

2Split 10b screen

4 Split 13 screen

1Split 13a screen

2Split 13b screen

5 Split 16 screen

steps 3, 4

6 Sequence Single

step 5

7 Sequence Multi

step 6

8 Sequence Time

(Split screen)

step1. When using front panel buttons, press the C or D button to select the display position to be set.

When using the mouse, left-click the number of the display position to be set.

•The number of the selected position is displayed in orange.

step2. When using front panel buttons, press the camera number button (1 to 16) of the desired camera number to be displayed.

•When not displaying the picture, press A button to display “– –.”

When using the mouse, left-click the number until the desired camera number appears.

•The number 1 to 16, or “– –” is displayed.

•The same camera number cannot be set repeatedly in one split screen display.

•When you select “– –,” “– –” displays for the camera number display on the normal screen.

(Single sequential screen <Sequence Single>)

step3. When using front panel buttons, press the C or D button to select the display position to be set.

When using the mouse, left-click the number of the display position to be set.

•The number of the selected position is displayed in orange.

step4. When using front panel buttons, press the camera number button (1 to 16) of the desired camera number to be displayed.

•When not displaying the picture, press A button to display “– –.”

When using the mouse, left-click the number until the desired camera number appears.

•The number 1 to 16, or “– –” is displayed.

(Split sequential screen <Sequence Multi>)

step5. Select the displaying order of the screen type.

step6. Select the desired switching time.

step7. When setting the output B settings to the same settings as those for the output A, select “Same as” and then select “Set.”

•While sequential screen is displayed for either of output A or B, you cannot change the settings of split screen and sequential screen.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

67