Mitsubishi Electronics DX-TL5000U instruction manual Information/Audio, Main device, Copy devices

Information/Audio User Menu

Information

This item is used to check the recording range of the main, copy 1, or copy 2 device.

User Menu

3 Information

1 Main Storage Memory Information

2 Copy 1 Drive Information

3 Copy 2 Drive Information

(Main device)

step1. Select <Main Storage Memory Information>.

•“Partition (Alarm) Information” appears when “Alarm Recording Area” (System MenuMemoryData Management Setting for Main MemoryChange Partition Setting) is set to other than “0 %.”

•“Partition (LPA) Information” appears when “Long Pre- Alarm Area” (System Menu Memory Data Management Setting for Main MemoryChange Partition Setting) is set to other than “0 %.”

(Copy devices)

step2. Select the device to be checked from <Copy 1 Drive Information> and <Copy 2 Drive Information>.

step3. Select the desired group for displaying the information.

Update Information: Updates the recording information.

Media Eject: Ejects the media.

Audio

This item is used to switch the audio channel from 1 to 4 during playback or displaying the picture supplied from the camera.

User Menu

4 Audio

1 Multiplexer Setting

step1. Select the desired audio channel.

CH1: Outputs the audio from the AUDIO IN 1 terminal while displaying the picture from the camera. Outputs the recorded audio of AUDIO IN 1 terminal during playback.

CH2: Outputs the audio from the AUDIO IN 2 terminal while displaying the picture from the camera. Outputs the recorded audio of AUDIO IN 2 terminal during playback.

CH3: Outputs the audio from the AUDIO IN 3 terminal while displaying the picture from the camera. Outputs the recorded audio of AUDIO IN 3 terminal during playback.

CH4: Outputs the audio from the AUDIO IN 4 terminal while displaying the picture from the camera. Outputs the recorded audio of AUDIO IN 4 terminal during playback.

•The audio channel which is output for the first time after switching a picture from the camera is set with <Audio Setting> (Setup MenuSystemAudio

Setting). ( See page 70.)

•When switching the multiplexer (for example, Split 4 Split 9, Single screen Split 4, Camera number 1 Camera number 5), the setting is reset to the setting set in the <Audio Setting>. When switching the picture supplied from the camera to the playback picture, or from playback picture to the picture supplied from the camera, the setting is also reset to the setting set in the <Audio Setting>. To fix the audio output, use the <Audio Setting> (Setup Menu System Audio Setting).

•The audio is output in sync with OUTPUT A. During playback, the recorded audio is output. During displaying the picture from the camera, the audio from camera is output.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

48