step6. Test the motion detection function on the condition you have set.
•The color of the dot detecting motion changes.
step7. To copy another motion detection settings, use “Same as settings.”
•Select “Copy Motion A” to copy the setting for the same camera number of Motion B.
•Select “Copy Motion B” to copy the setting for the same camera number of Motion A.
•When change is detected continuously, some functions such as setting change are not available because alarm recording is also continuously performed. In this case, motion detection function can be forcibly stopped for five minutes by setting the “Alarm Input” in the <Recording> menu to “Off.” You can change the settings by stopping recording during this time. This stopping is automatically released five minutes after the operation, and registered in the system log list. When you cancel the prohibition of alarm input manually, set it to “On.”
•When both of the ALARM IN terminal on the rear panel and the motion detection are set for the alarm recording trigger, the ALARM IN terminal on the rear panel is always given priority when both of the signals are input at the same time.
•The
•The motion detection of this unit may not operate correctly depending on the conditions of the input video signals especially when the “Sensitivity” is set to high setting. Be careful when connecting to a system, etc., that is set to alarm when the motion detection function of this unit is operated.
•To perform alarm recording for motion detection, set trigger for alarm recording to
–
•The motion detection of this unit functions by detecting the changes of brightness. So, the malfunction due to the change of the lightning or sunlight may occur, or motion detection does not function on the conditions such as the colors of the background and the clothes are the same.
Be sure to test this function sufficiently before operation.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
59
