4 | Secure the shoulder belt |
through one of the | |
| notches in the shoulder |
Reinstall Harness and Base
belt positioning guide.The |
belt should cross the base |
of the child's neck and |
across the chest (not the |
face or neck). Pull up on |
the shoulder belt to |
tighten. |
Check periodically to |
ensure your child has not |
moved out of position and |
loosened the shoulder belt. |
1 |
2 |
Reinstall Harness: Fit the buckle strap down through the slot in the seat. Make sure buckle faces out. From the bottom of seat, pull buckle's metal clip completely through pad and shell.
Pull up on buckle to make sure buckle’s metal plate is completely through the pad and shell.
!WARNING
Check vehicle instructions for more information about airbag/child restraint use.
Do Not Use only the lap belt when using this seat as a
The shoulder belt must always be adjusted snugly across the child’s chest.
3 | 6 |
| 5 |
1 | 4 |
| |
| 3 |
| 2 |
Thread the harness down through slot on left side of shell (1), across bottom of seat (2) and up through slot on right side (3).
Thread one latch plate onto harness from back to front (4).Thread the harness retainer (5). Do the same to the other harness end. Make sure the harness is not twisted.
Push harness ends through upper slots in shell (6).
NEVER place the shoulder belt under the child’s arms.
Failure to follow these warnings can result in serious injury or death to your child.
!WARNING
Failure to place buckle’s metal plate completely through pad and shell can result in serious injury or death to the child.
Failure to reattach the harness correctly, can result in serious injury or death.
44 | 45 | continued on next page. |
