4358-3340D Elite_Lux 3/13/06 3:08 PM Page 15

5

Place the child’s bottom and

 

back flat against the child

 

restraint.This will increase

 

comfort and allow the

 

harness to properly tighten.

6

 

Determine which of the

 

three available buckle slots

 

 

is both comfortable and

 

 

snug. Refer to “Removal of

 

 

Harness” and “Removal of

 

 

Base” to adjust buckle.

Check Harness/Headrest Height

7

 

Rear-Facing Position:

Harness

Harness guide must be

 

 

even with or just below

 

Guide

 

the shoulders.

 

 

 

 

If the harness is above the

 

 

child’s shoulders with the

 

 

headrest in the lowest

 

 

position, do not use this

 

 

child restraint. Use an infant

 

 

child restraint instead.

Forward-Facing Position:

Harness guide must be even with or just above the shoulders.

If the harness is below the child’s shoulders with the headrest in the 4th highest position, the child weighs at least 40 lbs. (18.1 kg) and is over 1 year old, convert the seat to a belt-positioning booster.

8

Rotate headrest/harness

adjusting levers in. Move

 

 

headrest up or down to

 

adjust. Make sure headrest

 

is locked into place.

 

NOTE: The highest

 

position is for belt-

 

positioning use only.

!WARNING:

Make sure metal bar is locked into position. Failure to do this can result in serious injury or death.

9

A

Infant Insert (on select

models): When using

 

 

insert (A), make sure insert

 

 

does not cover your

 

 

infant’s face in any way.

 

B

Remove the insert for

Colder babies and toddlers. To remove the insert,

unthread the harness from

splitter plate, remove

harness guides (see belt- positioning booster section), remove insert, and

rethread harness. Reverse to replace insert.

Harness Covers (on select models): Harness covers

(B)help provide comfort to the neck. For Harness Covers to fit correctly, you may have to fit the upper ends of the covers through the harness slots. Removal is the same as for the infant insert.

Side Pads (on select models): Side pillows (C) help keep child snugly in the child restratint. To remove, unbuckle harness and remove side pillows.

12

13

Page 8
Image 8
Eddie Bauer Luxe, Elite, 3-In-1, 4358-3340D Check Harness/Headrest Height, Rear-Facing Position, Forward-Facing Position