Eddie Bauer Elite, Luxe, 3-In-1, 4358-3340D manual Remove Seat Pad for Cleaning, Reinstall Base

4358-3340D Elite_Lux 3/13/06 3:08 PM Page 49

Pull harness through the back. Make sure the harness goes OVER the metal bar, BETWEEN metal bar and plastic handle of the harness/headrest

Remove Seat Pad for Cleaning

Remove base and harness as described in the “Belt-Positioning Booster” section.

5

adjuster.

Fit loops on harness ends onto the splitter plate.

1

From bottom of shell, release the elastic straps at the bottom of seat and the large elastic straps on the side of seat.

Upper Harness Guides

!WARNING

Failure to place harness over the metal bar, between bar and plastic handle of the harness/headrest adjuster in back, can result in serious injury or death.

6	Reinstall Base:
	Remove bar from base.
	Line up shell with base.
A	Begin with the rounded
	end, push bar completely
	through hole, starting on
	the right side (A), until it
	locks in place. Refer to
	“Removal of Seat Base”.
	46

Lower Harness Guides
2	Adjust backrest to lowest
	position. Remove both
A	lower harness guides (A)
	in bottom of seat under
	recline stand.
	Push harness guide lip
	toward outside of shell
	with one hand while
	pulling harness guide from
	the front with the other.
	47