2.1 System
The system screen allows you to specify a time zone, to change the system password and to specify a remote management user for the broadband router.
| Parameters |
| Description |
| Time Zone |
| Select the time zone of the country you are currently in. The router will set its time based |
|
| on your selection | |
|
|
| |
|
|
|
|
| Password Settings |
| Allows you to select a password in order to access the |
|
|
|
|
| Remote Management |
| You can specify a Host IP address that can perform remote management functions. |
|
|
|
|
Select one of the above three system settings selections and proceed to the manual’s relevant
2.1.1 Time Zone
The Time Zone allows your router to reference or base its time on the settings configured here, which will affect functions such as Log entries and Firewall settings.
| Parameter |
| Description |
| Set Time Zone |
| Select the time zone of the country you are currently in. The router will set its time |
|
| based on your selection. | |
|
|
| |
| Time Server Address |
| The router default the “Time Server Address” is “192.43.244.18” |
|
|
|
|
|
|
| The router can also take Daylight savings into account. If you wish to use this function, |
| Daylight Savings |
| you must check/tick the enable box to enable your daylight saving configuration |
|
|
| (below). |
|
|
|
|
| Times From |
| Select the period in which you wish to start daylight Savings Time |
|
|
|
|
| Times to |
| Select the period in which you wish to end daylight Savings Time |
|
|
|
|
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)
17