Edimax Technology Broadband Router manual Front Panel, 3 USB, Reset, Light Status, Description

3) USB

The USB ports allow you to share your files or printer through them. Each port can support both printer and USB mass storage devices.

Note 1: Please plug the external power to your USB mass storage devices.

Note 2: Please plug the USB mass storage dedicated to this NAS router in the USB 1 port for better management function and plug the USB flash disk used to share files among different PCs and notebooks in the USB 2 port for instant setup.

4)Reset

The Reset button allows you to do one of two things.

1)If problems persist or you experience extreme problems or you forgot your password, press the reset button for longer than 5 seconds and the router will reset itself to the factory default settings (warning: your original configurations will be replaced with the factory default settings)

Front Panel

On the router’s front panel there are LED lights that inform you of the router’s current status. Below is an explanation of each LED and its description.

		Figure 1.1
LED	Light Status	Description
PWR	ON	Router’s power supply is on
WAN 10/100M	ON	WAN port 100Mbps is connected
	Off	WAN port 10Mbps is connected
	ON	WAN is connected
WAN LNK/ACT
	Off	No WAN connection
	Flashing	WAN port is Activity (ACT)
LAN 10/100M	ON	LAN port 100Mbps is connected
(Port 1-4)
	Off	LAN port 10Mbps is connected
LAN LNK/ACT	ON	LAN is connected
	Off	No LAN connection
(Port 1-4)
	Flashing	LAN port is Activity (ACT)
	ON	USB storage device is connected
USB
	Off	No USB storage device connection
	Flashing	USB printer is printing. (ACT)
	ON	Wireless LAN has been activated
WLAN-G
	Off	Wireless LAN is disabled
	Flashing	Wireless LAN is Activity (ACT)

4