| Parameters |
| Description |
| Tool |
| You can format your USB disk by this tool. This NAS router supports FAT16, FAT32 and |
|
| EXT2. | |
|
|
| |
| Add |
| By clicking this button, you can launch the Add Partition page for you to add a new partition |
|
| on the USB disk. | |
|
|
| |
| Remove Partition |
| Select the partitions and click the “Remove Select” to remove partitions or click “Remove |
|
| All” to remove all partitions. | |
|
|
| |
|
|
|
|
You can now configure other advance sections or start using the router (with the advance settings in place)
NOTE: The partition size with FAT16 file system should be less than 2GB, and for FAT32 or EXT2 file system, the partition should be less than 160GB.
Auto Partition & Formatting
This function partitions and formats the USB storage disk in USB1 port according to the following rules.
(i)It partitions an USB storage disk in 160GB a partition and formats to FAT32 file system.
(ii)If the rest of partition size is under 160GB, then it will be partitioned as a partition.
(iii)This function only effects on the USB storage disk in USB1 port.
2.9.5 NAS Status
This Page shows the status of attached USB storage devices.
46
