Edimax Technology Broadband Router manual Add PC

Add PC	You can click Add PC to add an access control rule for users by IP addresses.
	If you want to remove some PC from the "IP Filtering Table", select the PC you want to
Remove PC	remove in the table and then click "Delete Selected". If you want remove all PCs from the
	table, just click "Delete All" button.
Filter client PC by MAC	Check “Enable MAC Filtering” to enable
address	MAC Filtering.
	Fill in “Client PC MAC Address” and “Comment” of the PC that is allowed to access the
Add PC	Internet, and then click “Add”. If you find any typo before adding it and want to retype
	again, just click "Reset" and the fields will be cleared.
	If you want to remove some PC from the "MAC Filtering Table", select the PC you want to
Remove PC	remove in the table and then click "Delete Selected". If you want remove all PCs from the
	table, just click "Delete All" button. If you want to clear the selection and re-select again,
	just click “Reset”.

You can now configure other advance sections or start using the router (with the advance settings in place)

Parameters	Description
Client PC Description	The description for this client PC rule.
	Enter the IP address range that you wish to apply this Access Control rule. This is the
Client PC IP Addresses	user’s IP address (es) that you wish to setup an Access Control rule.
	Note: You need to give your LAN PC clients a fixed/static IP address for the Access
	Control rule to work properly.
Client PC Service	You can block the clients from accessing some Internet services by checking the services
	you want to block.
Protocol	This allows you to select UDP, TCP or both protocol types you want to block.
Port Range	It can be assign up to five port ranges. The router will block clients from accessing
	Internet services that use these ports.
Apply Changes	Click “Apply Changes” to save the setting.
Reset	Click “Reset” to clear all fields.

Click <Apply Changes> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

38