Edimax Technology Broadband Router manual Cable Modem, Telstra Big Pond

Menu	Description
Cable Modem	Your ISP will automatically give you an IP address
Fixed-IP xDSL	Your ISP has given you an IP address already
PPPoE xDSL	Your ISP requires you to use a Point-to-Point Protocol over Ethernet (PPPoE)
	connection.
PPTP xDSL	Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection.
L2TP xDSL	Your ISP requires you to use a Layer Two Tunneling Protocol (L2TP) connection.
Telstra Big Pond	This Protocol only used for Australia’s ISP connection.

Click on one of the WAN type and then proceed to the manual’s relevant sub-section (1.1, 1.2, 1.3, 1.4, 1.5 or 1.6). Click on Back to return to the previous screen.

1.1 Cable Modem

Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP’s may also require that you fill in additional information such as Host Name and MAC address (see screen below).

Note: The Host Name and MAC address section is optional and you can skip this section if your ISP does not require these settings for you to connect to the Internet.

10