Wireless LAN Access Point Configuration
24
Parameter Description
DHCP Client Log This page shows all DHCP clients (LAN PCs) currently connected to your
network. Number of DHCP Clients displays the number of LAN clients that
are currently linked to the Access Point’s DHCP Server. The DHCP Client
Log displays the IP Address and the MAC Address of each LAN Client.
Use the Refresh button to get the most updated situation.
The Configuration Tools screen allows you to save (Backup) the Access Point’s
current configuration setting. Saving the configuration settings provides an added
protection and convenience should problems occur with the Access Point and you
have to reset to factory default. When you save the configuration setting (Backup)
you can re-load the saved configuration into the Access Point through the Restore
selection. If extreme problems occur you can use the Restore to Factory Default
selection, this will set all configurations to its original default settings (e.g. when you
first purchased the Access Point).