III-4-5. Configuration Tools | Edimax Technology EW-7438RPn instruction

III-4-5. Configuration Tools

III-4-5. Configuration Tools

The “Configuration Tools” menu allows you to backup the EW-7438RPn Air’s settings, restore the settings to a previous version or restore the EW-7438RPn Air back to its factory default state. You can also upgrade the firmware, reboot the device and export the system log.

Backup Settings	Click “Save” to save the current settings on
	your computer as config.bin file.
Restore Settings	Click “Browse” to find a previously saved
	config.bin file and then click “Upload” to
	replace your current settings.
Restore to Factory	Click “Reset” to restore settings to the factory
Default	default. A pop-up window will appear and ask
	you to confirm and enter your log in details.
	Enter your username and password and click
	“Ok”. See below for more information.

28

Image 31

Edimax Technology EW-7438RPn III-4-5. Configuration Tools, Backup Settings, Restore Settings, Restore to Factory, Default

Contents

User Manual EW-7438RPn Air02-2014 Installation CONTENTSIII. Browser Based Configuration Interface V. Appendix V-1-1-4 I-3. LED Status I-1. Package ContentsI. Product Information I-2. System Requirements WPS/Reset Button LED I-4. Hardware Overview I-5. Safety Information II-1. Installation II. Installation 3. Open a web browser and if you do not automatically arrive at the “Get Started” screen shown below, enter the URL http//edimaxext.setup and click “Get Started” to begin the setup process 6. Please wait while the EW-7438RPn Air tests the connection 8. Please wait a moment until the extender is ready AndroidiOS Configuration Interface II-2. WPS Setup II-3. Reset to Factory Default Settings III-1. Login III. Browser Based Configuration InterfaceWindowsMac Page III-2. Save Settings III-3-1. Home III-3. Main MenuUse the main menu down the left side to navigate Firmware Version Wireless SchedulingUptime Hardware Version Subnet Mask Signal StrengthDefault IP Address III-3. WPS Settings III-3-2. iQ SetupWPS Status Mode Device is as ConfigurationConfigure via Push Self PIN Code You can adjust the level of wireless output III-4. Advanced SettingsTx Power Enable LED Off Security Type III-4-1. WLAN SecurityBroadcast SSID Device SSID Automatically III-4-2. Scheduling SettingTime Setting Set Date & Time Delete EditSchedules can be set individually by day or to occur every day Page III-4-3. Guest Network Enable Guest SSIDWireless Guest Enable Wireless Pre-shared Key Encryption New Password III-4-4. Administration UtilityCurrent Password Enter your current password Gateway Address 2.4GHz Restore to Factory III-4-5. Configuration ToolsBackup Settings Restore Settings Browse Upgrade Firmware Apply Reboot Export system log System Log IV. EdiRange App IV-1. Login 4. Wait for the app to log in More IV-2. Main MenuLogout Help IV-3. Good Night Mode IV-4. Wi-Fi Scheduling IV-5. Admin V-1-2. How to modify the IP address of your computer V-1. Configuring your IP addressV. Appendix V-1-1-1. Windows XP V-1-1. How to check that your computer uses a dynamic IP addressPage V-1-1-2. Windows Vista Page 2. Under “Network and Internet” click “View network status and tasks” V-1-1-3. Windows3. Click “Local Area Connection” Click “Properties” Page V-1-1-4. Windows 5. Choose your connection and right click, then select “Properties” Page Page V-1-1-5. Mac OS Page Please make a note of your static IP before you change it V-1-2-1. Windows XP address, subnet mask, default gateway and DNS server addresses IP address Subnet Mask Click ‘OK’ when finished V-1-2-2. Windows Vista V-1-2-3. Windows Click “Local Area Connection” Under “Network and Internet” click “View network status and tasks” Click “Properties” IP address Subnet Mask Click ‘OK’ when finished Page V-1-2-4. Windows 3. Right click “Network” and then select “Properties” Choose your connection and right click, then select “Properties” IP address Subnet Mask Click ‘OK’ when finished V-1-2-5. Mac Page 6. Click “Apply” to save the changes V-1-3-1. Windows 7 & Vista V-1-3. How to Find Your Network Security KeyPage V-1-3-2. Mac Page Page V-1-4-1. Windows XP, Vista V-1-4. How to Find Your Router’s IP AddressPage V-1-4-2. Windows 3. A new window will open, type “ipconfig” and press Enter Page V-1-4-3. Mac Page V-2. Connecting to a Wi-Fi network Page V-3. Glossary Page Page COPYRIGHT FCC Radiation Exposure Statement SafetyFederal Communication Commission Interference Statement FCC Caution WEEE Directive & Product Disposal EU Declaration of Conformity ETSI EN 300 328 V1.8.1 Equipment N300 Smart Wi-Fi Extender Model No. EW-7438RPn AirDeclaration of Conformity Spectrum TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION Notice According to GNU General Public License VersionGNU GENERAL PUBLIC LICENSE Preamble intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program NO WARRANTY