5.In the ‘Locate Driver Files’ box, select ‘Specify a location’. Disable all other options.

Click ‘Next’.

6.In the displayed dialog box enter the path to the installation files:

•Insert your Diva Server Software Suite CD-ROM into the CD-ROM drive and enter the following path:

D:\DRIVER\i386\ENGLISH

(where D: is your CD-ROM drive letter).

•Or enter the path to the installation file on the hard disk, for example:

C:\Temp\ISDN

(where C: is the hard disk drive letter).

Click ‘OK’.

7.In the ‘Driver Files Search Results’ box, verify that Windows 2000 has found the appropriate drivers.

Click ‘Next’ to continue the installation.

Note: If you are installing a Beta version of the Diva Server software, a message might appear warning you that the software has not been tested with Windows. This message indicates only that the Diva Server for Windows software does not yet have Microsoft certification. Continue with the installation as this does not prevent a correct installation of the software.

Official final releases of Diva Server for Windows Software are Microsoft certified and this message does not appear.

8.If you have a Diva Server Analog adapter installed, go to step 13 on page 35 to continue with the installation.

Software Installation

32