CHAPTER 2

About Diva Server for Windows

Diva Server for Windows enables you to use your Eicon Diva Server adapter with Microsoft Windows 2000, Windows XP, or Windows Server 2003. Diva Server for Windows provides modem emulation, connectivity over ISDN or channelized T1 lines via the Remote Access Service (RAS) of Windows 2000, Windows XP, or Windows Server 2003, a CAPI interface for ISDN-based applications, and a TAPI interface for telephony-based applications. Diva Server for Windows also provides an SNMP agent to support the Microsoft Windows implementation of the Simple Network Management Protocol (SNMP).

Features

The list below provides an overview of the features supported by Diva Server for Windows. For information on further supported features of Diva Server adapters, refer to the Features section at the end of this reference guide.

General Features

•Support for ISDN basic rate interface (BRI), ISDN primary rate interface (PRI), and for the channelized T1 interface

•Support for fractional PRI, E1 and T1 lines

•Support for multiple PRI, E1 and T1 lines

•Support for multiple CPU operating systems

•Support for analog lines

•Automatic Diva Server adapter detection

•Support for ISDN lines with a transfer rate of 64 kbps or 56 kbps (for example USA)

•Support for channelized T1 lines with a transfer rate of 56 kbps (see Channelized T1 (robbed bit signaling) on page 13)

•Support for unchannelized lines with a transfer rate of 64 kbps or 56 kbps

•Support for R2 signaling E1 lines with a transfer rate of 64 kbps

•Support for up to 240 B-channels for Diva Server BRI, 4BRI, T1/PRI, and 2PRI adapters

•Support for up to 480 B-channels for Diva Server 4PRI adapters (the total amount of channels that can be used depends on the application)

•Modem connections up to 56 kbps (V.90)

•COM port (modem emulation)

About Diva Server for Windows

9