4.In the ‘Configuration’ dialog box, select ‘Remote access (dial-up or VPN)’.

Click ‘Next’.

5.In the ‘Remote Access’ box, select whether the server should receive VPN and/or dial-up connections.

Click ‘Next’.

6.In the ‘IP Address Assignment’ box, specify whether IP addresses will be assigned to remote clients automatically or from a specified range.

Click ‘Next’.

Note: If you select to assign the IP addresses from a specified range, enter the address ranges in the following dialog boxes.

7.If your computer is part of a network, the ‘Managing Multiple Remote Access Servers’ box is displayed.

Specify if you want to set up your RAS server to use an existing RADIUS server. By default, the RADIUS server is not used.

The RADIUS (Remote Authentication Dial-In User Service) protocol is used for managing remote user authentication and authorization in dial-up networks or virtual private networks. If a RADIUS server is available in your LAN you can have your RAS connections authenticated and monitored by this server. You do not need to create your own remote access policies.

Click ‘Next’.

8.Click ‘Finish’ to finish the ‘Routing and Remote Access Server Setup Wizard’.

Dial-Up Networking and RAS Administration

53