LC-NB2UW
31
1
Press the MENU button and the ON-SCREEN MENU will appear .
Press the POINT LEFT/RIGHT buttons to select SETTING and
press the SELECT button. Another dialog box SETTING Menu will
appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to set, and
then press the SELECT button to set it “On” or “Off”.
Blue back When this function is in the “On” position, this projec tor
will produce a blue image instead of the video noise on
the screen when the input source is unplugged or
turned off.
Display When this function is in the “On” positi on, the On-Screen
Displays always appear when adjustments are made. (The
following displays disappear by switching this function
“Off.”)
• Preparation Display
(The Number-counting-down Display)
• Mode Display
• Volume/Mute Display
• Zoom Display
• Focus Display
• Normal Display
• No show Display
• Keystone Display
• D.Zoom Display
Ceiling When this function is in the “On” position, the top /
bottom and the left / right reversed picture is provide d
to project the image from a ceiling mounted projector.
Rear When this function is in the “On” position, th e left / right
reversed picture is provided to project the image to a
rear projection screen.
Split wipe Turn this function “On” position in the SETTING menu. The
picture will change into next one by sliding black im age side
ways like drawing the black curtains when the input so urce is
turned into another one.
Lamp age The Lamp age function is designed to reset the lam p replacement monitor timer. When replacing the lamp,
reset the lamp replacement monitor timer by using this function. (Refer to page 34.)
The language used in the ON-SCREEN MENU is selectabl e from
among English, German, French, Italian, Spanish a nd Japanese.
1
Press the MENU button and the ON-SCREEN MENU will appear.
Press POINT LEFT/RIGHT buttons to select LANGUAGE and
press the SELECT button. Another dialog box LANGUAGE Men u
will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the language that you want to set,
and then press the SELECT button.