LC-NB2UW
8
CONNECTING THE AC POWER CORDThis projector uses nominal input voltages of 100-120 V AC.
The projector automatically selects the correct input voltage.
It is designed to work with single-phase power systems hav ing
a grounded neutral conductor. To reduce the risk of electrical
shock, do not plug into any other type of power system. Consu lt
your authorized dealer or service station if you are not sure of the
type of power supply being in use. Connect the projector with the
peripheral equipment before turning the projector on. (Ref er to
pages 10 - 13 for connection.)
This projector is equipped with cooling fans for protection f rom overheating. Pay attention to the following to ensure the
ventilation and avoid a possible risk of fire and m alfunction.
• Do not cover the vent slot.
• Keep the rear grill at least one meter away from any object.
• Make sure that there is no object on both sides of the projector.
Those obstacles may prevent the projector from taking the
cooling air through the side Air Intake Vent Slots .
For the safety, unplug the AC Power Cord when the
appliance is not used.
When this projector is connected to the outlet with
the AC Power Cord, the appliance is in Stand-by
Mode and consumes a little electric power.