LC-NB2UW
29
Select VIDEO mode by pressing the MODE button on the T op
Control or the VIDEO button on the Remote Control Unit.
MENU OPERATION
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select Video and pres s
the SELECT button.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SYSTEM and press the SELECT button. Another dialog box
VIDEO SYSTEM Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to “Auto”, and then press the SELECT
button.
Auto
The projector automatically detects the incoming Video s ystem,
and
adjusts itself to optimize its performance.
When the Video System is PAL-M or PAL-N, select the s ystem
manually.
PAL I SECAM / NTSC / NTSC4.43 I PAL-M I PAL-N
If the projector cannot reproduce the proper video image, it is
required to select a specific broadcast signal form at among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, or PAL-N.
This projector has a picture screen resize function, whi ch enables you to display the image in desirable size.
1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SCREEN and press the SELECT button. Another dialog box
PICTURE SCREEN ADJUSTMENT DISPLAY will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the screen size that you want to
set, and then press the SELECT button.
Regular
Normal Video Image size with 4 x 3 aspect ratio.
Wide
Resizes the image for wide screen size with 16 x 9 aspec t ratio.
Keystone
When the image is distorted vertically, select Ke ystone in the dialog box.
Correct the Keystone distortion by pressing KEYSTO NE !/"button or
POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 20.