Onkyo HT-R640 instruction manual Making HDMI Connections, Connecting the AV Receiver-Continued

Connecting the AV Receiver—Continued

Making HDMI Connections

Step 1: Use HDMI cables to connect the AV receiver’s HDMI jacks to your HDMI-compatible DVD player, TV, projector, and so on.

Step 2: Assign each HDMI IN to an input selector in the HDMI Video setup (see page 40).

Video Signal Flow Chart

Digital video signals received at HDMI IN 1 and 2 are only output by the HDMI OUT and sent to your TV. Composite video, S-Video, and component video input sig- nals are not output by the HDMI OUT.

Note:

IN

	Composite	S-Video	Component	HDMI
AV receiver
	Composite	S-Video	Component	HDMI

OUT

The onscreen setup menus are not output by the HDMI OUT, so you’ll also need to make a composite video, S-Video, or component video connection to your TV (see page 24).

Audio Signal Flow Chart

Digital audio signals received at HDMI IN 1 or 2 are output by the speakers and headphones connected to the AV receiver. They’re also output by the OPTICAL OUT and can be output by the HDMI OUT by setting the HDMI Audio Out set- ting to On (see page 69).

IN

AV receiver

OUT

HDMI Optical Coaxial Analog

*

HDMI Optical Analog

*To listen to audio received at HDMI IN 1 and 2 through your TV speakers, set the HDMI Audio Out setting to On (see page 69) and your DVD player’s output setting to PCM.

HDMI	HDMI
OUT	IN

DVD player

TV

HDMI HDMI

IN 1

32