First Time Setup—Continued

Changing the Input Display

If you connect an -capable Onkyo MiniDisc recorder, CD recorder, or next generation HDD-compat- ible component to the TAPE IN/OUT or VIDEO 3 IN

jacks, for to work properly, you must change this setting.

This setting can only be changed on the AV receiver.

1, 2

1, 2

iPod photo: If you’re using an iPod photo with the DS-A1 Remote Interactive Dock, connect the DS-A1 to the VIDEO 3 IN jacks.

1

Press the [TAPE] or [VIDEO 3]

 

TAPE

 

input selector button so that

 

“TAPE” or “VIDEO3” appears on

 

the display.

 

VIDEO 3

TV Format Setup

(not North American models)

You must specify the TV system used in your area.

1

 

Press the [RECEIVER] or [AMP]

 

 

AMP

RECEIVER

button, followed by the [SETUP]

button.

 

 

 

 

The main menu appears onscreen.

SETUP

2

Use the Up and Down [ ]/[ ]

 

buttons to select “7. Hardware

 

Setup,” and then press [ENTER].

 

The Hardware Setup menu appears.

 

7.Hardware Setup

 

 

------------------------

 

a.TV Format

:Auto

 

b.Remote ID

:1

 

c.HDMI Audio Out :Off

 

d.SW Input Sensitivity

 

 

: 0dB

3 Use the Up and Down []/[ ]

2 TAPE

VIDEO 3

Press and hold down the [TAPE] or [VIDEO 3] input selector but- ton (about 3 seconds) to change the setting.

Repeat this step to select MD, CDR, or HDD.

For the TAPE input selector, the setting changes in this order:

TAPE MD CDR HDD

For the VIDEO 3 input selector, the set- ting changes in this order:

VIDEO 3 HDD

buttons to select “TV Format,” and then use the Left and Right []/[ ] buttons to select:

Auto: Select this to automatically detect the TV system from the video input signals.

NTSC: Select if the TV system in your area is NTSC.

PAL: Select if the TV system in your area is PAL.

4

Press the [SETUP] button.

 

 

The setup menu closes.

SETUP

 

Note:

HDD can be selected for the TAPE input selector or VIDEO 3 input selector, but not both at the same time.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

44

Page 44
Image 44
Onkyo HT-R640 instruction manual Changing the Input Display, TV Format Setup Not North American models