Onkyo HT-R640 Setting the Satellite Radio Mode, Signing Up for XM Satellite Radio

Listening to the Radio—Continued

TUNING , PRESET , ENTER

TUNER SETUP

Setting the Satellite Radio Mode

1	On the AV receiver, press the
	SETUP
	[SETUP] button.

Signing Up for XM Satellite Radio

Before you can use XM Satellite Radio, you must first sign up for an account. You’ll need a major credit card and your XM Satellite Radio ID, which you can get from the AV receiver, as explained below, or from the Passport System package and itself.

1	Use the TUNING Up and Down
	[ ]/[ ] buttons to select
TUNING PRESET
	channel 0.
	Your XM Satellite Radio ID number is
	displayed. Write it below.
	ID
2	To sign up, go to:
	http://activate.xmradio.com
	Or call: 1-800-967-2346
	For XM Canada, go to:

2

TUNING PRESET

Use the TUNING Up or Down []/[ ] buttons to select

“7. Hardware Setup,” and then press [ENTER].

7.Hardware Setup
------------------------
a.SAT Radio	: None
b.Remote ID	:1
c.HDMI Audio Out :Off
d.SW Input Sensitivity
ENTER	: 0dB

http://xmradio.ca

Or call: 1-877-GET-XMSR

Notes:

•Channel 0 cannot be selected in Category Search mode. You must select Channel Search mode (see page 54).

•The following letters are not used in XM Satellite Radio IDs: I, O, S, F.

3

TUNING PRESET

TUNING PRESET

Use the TUNING Up or Down []/ [ ] buttons to select “SAT Radio,” and then use the PRESET []/[ ] buttons to select “XM.”

Pressing the PRESET []/[ ] but- tons cycles through the following SAT options: None ↔ XM.

None: Select if you are not using sat- ellite radio.

XM: Select to use XM satellite

ENTER

radio.

4	Press the [SETUP] button.
Selecting XM Satellite Radio
TUNER	Press the [TUNER] input selector
	button repeatedly to select XM.

If “CHECK ANTENNA” appears on the display, make sure the XM Passport System is connected properly.

53