Onkyo HT-R640 Video Input, HDMI Video Setup, First Time Setup-Continued, The setup menu closes

First Time Setup—Continued

Video Input

HDMI Video Setup

If you connect a video component to HDMI IN 1 or 2, you must assign that input to an input selector. For exam- ple, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector.

Note:

When HDMI IN 1 or 2 is assigned to an input selector here, the digital audio input for that selector is automat- ically set to HDMI IN 1 or 2. If you specify this setting as “No,” be sure to confirm that Digital Input is properly set to select an input you desire. See “Digital Input” on page 39.

1		Press the [RECEIVER] or [AMP]
		button followed by the [SETUP]
AMP	RECEIVER	button.
		The main menu appears onscreen.

	SETUP
2	Use the Up and Down [ ]/[ ]
	buttons to select “0. Video Input,”
	and then press [ENTER].
	The Video Input menu appears.
	0.Video Input
	------------------------
	Component Video
	a.DVD	: IN1
	b.VIDEO1	: ---
	c.VIDEO2	: ---
	d.VIDEO3	: ---
	HDMI
	e.DVD	: IN1
	f.VIDEO1	: No
	g.VIDEO2	: No
	h.VIDEO3	: No

3	Use the Up and Down [ ]/[ ]
	buttons to select an input selec-
	tor, and use the Left and Right
	[ ]/[ ] buttons to select:
	0.Video Input
	------------------------
	Component Video
	a.DVD	: IN1
	b.VIDEO1	: ---
	c.VIDEO2	: ---
	d.VIDEO3	: ---
	HDMI
	e.DVD	: IN1
	f.VIDEO1	: No
	g.VIDEO2	: No
	h.VIDEO3	: No

IN1: Select if the video component is connected to HDMI IN 1.

IN2: Select if the video component is connected to HDMI IN 2.

No: Select when not using the HDMI output.

4	Press the [SETUP] button.
	The setup menu closes.
SETUP

40