LC-NB2UW
28
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SCREEN and press the SELECT button. Another dialog box
PICTURE SCREEN Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the function that you want to select
and then press SELECT button.
True
To turn the image into its original size select True in the dialog box.
When the original image size is larger than the screen size (800 x
600), this projector becomes Digital Zoom mode automatic ally.
Keystone
When the image is distorted vertically, select Ke ystone in the dialog box. The ON-SCREEN menu and SCREEN
ADJUST menu disappears and the message “Keystone” is displayed. Correct the Keystone distortion by pressing the
KEYSTONE !/"button or the POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 20.
Digital zoom
To adjust the image size or pan the image, select Digit al zoom in the dialog box. The ON-SCREEN menu and
SCREEN ADJUST menu disappears and the message “D. Zoom ” is displayed. This projector is also turned into Digital
Zoom mode by pressing the D.ZOOM !/" button on the Remote Control Unit.
Refer to the following for operation.
Expand function
To expand the image size, press the D.ZOOM ! button or the SELECT button. The image is magnified by degrees.
Compress function
To compress the image size, press the D.ZOOM "but ton or the RIGHT CLICK button. The size of image is reduced by
degrees.
Panning function
To pan the image, press the POINT UP/DOWN/LEFT/RIGHT buttons. Panning function can work only when the image
is larger than the screen size.
To cancel Digital Zoom mode, press the any buttons except D.Z OOM !/", SELECT, RIGHT CLICK, POINT or
LASER button. To adjust the image to the screen size (800 x 600), press NORMAL button.
• This projector cannot display in the res olution higher than 1024 X 768. If your computer’s screen resolution is hig her
than 1024 X 768, reset the resolution to the lower before connec ting the projector.
• The image data in other than SVGA (800 x 600) is modified to fit the screen size in the initial mode.
• The normal “Panning Operation” m ay not function properly if the computer system prepared with the “PC Adjust” is
used.