PREPARATION

CONNECTING AC POWER CORD

This projector uses nominal input voltages of 100-120 V or 200- 240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of the type of power supply being in use.

Connect projector with the peripheral equipment before turning

projector on. (Refer to pages 11 13 for connection.)

Page 8
Image 8
Eiki LC-VC1 owner manual Preparation Connecting AC Power Cord