1 Turn the projector on, and press the MENU button and the ON- SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT (REAR CLICK) button. Another dialog box SETTING MENU will appear.
2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to “Lamp age” and then press the SELECT (REAR CLICK) button.
3 Move the arrow to replaced lamp number and then press the SELECT (REAR CLICK) button. The message "Lamp replace monitor Reset?" is displayed.
4 Select [Yes] to reset the Timer.
NOTE; Do not reset the Lamp Replacement Monitor Timer, except after the lamp is replaced.
SELECTING LANGUAGE
The language used in the ON-SCREEN MENU is selectable from among English, German, French, Italian, Spanish and Japanese.
1 Press the MENU button and the ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to select LANGUAGE and press the SELECT (REAR CLICK) button. Another dialog box LANGUAGE Menu will appear.
Lamp replacement monitor timer
Be sure to reset the Lamp Replacement Monitor Timer when the Lamp Assembly is replaced. Replacement Monitor Timer is reset, the LAMP REPLACEMENT indicator stops lighting.
To change the code of the projector;
Set the Remote control in the SETTING menu to “Mode 2”.
To change the code of the Remote Control;
Press both the MENU and the NORMAL buttons on the Remote Control together for over 10 seconds.
After changing the code, make sure the Remote Control operates properly.
To return to the normal code (Mode 1), operate both projector and Remote Control in the ways above again.
SETTING
USB
This Projector is equipped with USB port for interactive operation between the projector and the computer. Set the mode following steps below.
Wireless Mouse mode
Select " " when controlling the computer with the Remote Control of this projector.
Projector mode
Select " " when controlling the projector with the computer.
NOTE: Before you control the projector by computer, install USB driver (optionally sold parts) and set up the computer following instruction in the USB driver package. Contact your authorized dealer.
Remote control
This projector has two different remote transmit codes; the factory-set normal code (Mode 1) and the secondary code (Mode 2). This switching function prevents the remote control operation mixture (jam) when operating several projectors or video equipment together.
When operating the projector in “Mode 2” both projector and Remote Control must be switched to “Mode 2”.
When the Lamp
2 | Press the POINT DOWN button and a red-arrow icon will |
appear. Move the arrow to the language that you want to set, |
and then press the SELECT (REAR CLICK) button.
Move the Pointer to the language that you want to set, and then press the SELECT (REAR CLICK) button.
