Basic Operation
Turning On the Projector
1 | Complete peripheral connections (with Computer, VCR, etc.) |
| before turning on the projector. (Refer to page 22~25 for |
| connection.) |
2 | Turn on the MAIN On/Off switch of the projector. The |
| LAMP indicator lights red, and the READY indicator lights |
| green. |
3 | Press the POWER |
| remote control. The LAMP indicator dims, and the cooling |
fans start to operate. The preparation display appears on the screen and
If the projector is locked with a PJ PIN code, PJ PIN code Input Dialog Box will appear. Enter the PIN code as instructed below.
Enter a PJ PIN code
Select a number by softly tapping the control pad and fix the number with the SELECT button. The number will change to "✳". If you fixed a wrong number, move the yellow frame pointer to "C" or "Ent" once, then enter the correct number again.
Repeat this step to complete entering a
When the
If you entered a wrong PIN code, the entered number (✳✳✳✳) will turn red and disappear. Enter a correct PIN code all over again.
16
The preparation display disappears after 20 seconds.
Selected Input and Source
(See page 37~38 for Input)
PJ PIN code Input Dialog Box
Pointer(yellow frame)
What is PIN code?
PIN code is a security code using Personal Identification Number that allows the person who knows it to operate the projector. Setting PIN code prevents the projector from being operated by an unauthorized person.
A PIN code consists of a
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer be started. Set a new PIN code with special care, write it down in column on page 81 of this manual, and keep it at hand. Should the PIN code be missing or forgotten, consult your sales dealer or the service station.
After the OK icon disappears, you can operate the projector.
28
