Image Adjustment
Gamma
Adjust with the Control pad to obtain better balance of contrast. (From 0 to 15.)
Noise reduction
Select one of the followings to reduce noise of the image. Off . . . .disabled
L1 . . . . .Select “L1” for an active picture.
L2 . . . . .Select “L2” for a still picture.
Progressive
With this function On, interlaced video signal is displayed in a progressive picture.
Film
This function is effective on 2:3 or 2:2 pulldown video sources. With this function On, the projector reproduces pictures faithful to the original film quality.
Store
To store the adjustment data, move an yellow frame pointer to Store and press the SELECT button. Image Level Menu will appear. Move the yellow frame pointer to one of Image 1~10 and then press the SELECT button.
Reset
Reset all adjustments to their previous figures.
Quit
Exits Image Adjust menu.
✔Note:
•Progressive, Film, and Noise reduction cannot be displayed when selecting PC input source.
•Progressive cannot be selected when 480p, 575p, and 720p is selected in the System menu. (p40)
•Film can only be activated when selecting PAL, NTSC, 480i or 575i for Video System and "On" for Progressive.
•2:3 Pulldown or Telecine transfer is the process of changing images from film mode to video mode. While film runs at 24 frames per second (fps), NTSC television signals (or video) have a run rate of 30fps so the 24 fps film needs to be speeded up to 30fps and transferred using a proper field pattern to get the best
Store
Image Level Menu
Move the yellow frame pointer to an image and then press the SELECT button. The confirmation box appears.
Select [Yes] to store the image adjusted.
Image Adjustment
47
