Eiki LC-SX6, LC-X6 owner manual To Change the PJ PIN Code setting, To Change PJ PIN Code

Setting

PJ lock

This function prevents the projector from being operated by an unauthorized person and provides the following settings for security options.

On1	. . . . . .requires to enter the PIN code every time turning on
	the projector.
On2	. . . .requires to enter the PIN code to operate the
	projector once the power cord is disconnected; as
	long as the AC power cord is connected, the
	projector can be operated without the PIN code.
Off	. . . . .the projector is unlocked with the PIN code. To
	release PJ lock, select this setting.

Whenever to change the PIN code (the four-digit number), you are required to enter the PIN code. "1234" is set as the initial PIN code at the factory.

Enter a PJ PIN code

Select a number with using the Control pad and fix the number with the SELECT button. The number will change to "✳". If you fixed a wrong number, move the pointer to "C" once with the Control pad to clear the number. Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, move to "Ent". Press the SELECT button so that you can change the following PIN code lock settings.

If you entered a wrong PIN code, the number (✳✳✳✳) will turn red and disappear. Enter a correct PIN code all over again.

To Change the PJ PIN Code setting

Select Off, On1, or On2 with the Control pad and then press the SELECT button.

To Change PJ PIN Code

The PIN code can be changed to your desired four-digit number.

Select "PJ PIN code change" with the Control pad, and press the SELECT button. The PIN code input dialog box will appear. Enter a current PIN code, and then a new PIN code as follows:

Select a number with the Control pad and fix the number with the SELECT button. Repeat it to complete entering a four-digit number. When the four-digit number is fixed, move the pointer to "Ent". Then press the SELECT button.

CAUTION:

WHEN YOU HAVE CHANGED PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON PAGE 81, AND KEEP IT SECURELY. SHOULD THE PIN CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO LONGER BE OPERATED.

PJ lock

When the projector is locked with the PIN code, the PJ lock mark appears at top left of the Main menu.

Enter a PIN code

The input numbers change to “✳” for security.

Pointer

Change the PJ Lock setting

Select a desired setting with the Control pad and press the SELECT button.

Change the PIN code

Select PJ PIN code change and press the SELECT button. The PIN code input dialog box will appear.

The setting selected.

Pointer

Setting

57