Screen Setting
D. Zoom
D. Zoom
D. Zoom +
Press the SELECT button at the D. Zoom +. The message “D. Zoom +” is displayed. Press the SELECT button to expand the image size. And use the Control pad to pan the image. The Panning function can work only when the image is larger than the screen size.
D. Zoom –
Press the SELECT button at the D. Zoom
✔Note:
To exit the D. Zoom +/– mode, try the followings:
•To return to the normal screen, change Input, or change the screen size.
•To exit the panning mode, press any button except the D. ZOOM button, the
SELECT button, and the CH and ID buttons. | Keystone |
|
Keystone
This function corrects distortion of a projected image. Press the SELECT button at Keystone twice and The keystone dialog box appears. Adjust keystone with the Control pad.
Press the SELECT button at Keystone and select either Store or Reset with the Control pad, and then press the SELECT button to fix the selection.
Store . . . .stores the keystone adjustment even if the AC power cord is disconnected.
Reset . . . . .resets the keystone adjustment when the AC power cord is disconnected.
Ceiling
When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling mounting the projector.
Rear
When this function is “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen.
✔Note:
•The True and D. Zoom +/– cannot be selected when projecting AV sources or selecting “480i”, “575i”, “480p”, or “575p” in the System menu (p39~40).
•This projector cannot display any resolution higher than 1600 X 1200. If your computer’s screen resolution is higher than 1600 X 1200, reset the resolution to the lower before connecting the source to the projector.
•The image data in other than XGA (1024 x 768 for
•The panning function may not operate properly if the computer system prepared in the PC Adjust Menu is used.
Ceiling |
Rear |
Screen Setting
49
