17
Chapter2AdjustingScreens

2-3. Adjusting Color

●To select the display mode (color mode)

This function allows easy selection of a desired mode accordi ng to monitor application.

Display Modes

Mode Purpose

1-Custom Availableforthecolorsettingsaccordi ngtoyourpreference.
2-Adobe®RGB SuitableforcolormatchingwithA dobe®RGBcompatibleperipherals.
3-sRGB Suitableforcolormatchingwit hsRGBcompatibleperipherals.
4-EBU Suitableforreproducingtheco lorgamutandgammaassetforthbyEBU(European
BroadcastingUnion)standards.
5-REC709 Suitableforreproducingthec olorgamutandgammaassetforthbytheITU-RRec.70 9
standard.
6-SMPTE-C Suitableforrepr oducingthecolorgamutandgammaassetforthbySM PTE-Cstandards.
7-DCI Suitableforreproducingthecolorgamutandgammaa ssetforthbyDCIstandards.
8-CAL1
9-CAL2
10-CAL3
DisplaysthescreenadjustedbytheColorManagementSof tware“ColorNavigator”and
SelfCalibration.
Note
• In CAL mode, ColorNavigator and SelfCalibration can be used for adjustment. (See “Chapter 4 SelfCalibration” (page 36))
• Available CAL mode differs de pending on each input signal.
Attention
• Avoid operating any fu nction of the monitor while using ColorNavigator.
Example:AtDVIinput
Themodemenu
appears.
1-Custom←→2-Adobe®RGB←→3-sRGB←→4-EBU←→5-REC709
10-CAL3←→9-CAL2←→8-CAL1←→7-DCI←→6-SMPTE-C

Procedure

1. Press .

The mode menu appears at the bottom left of t he screen.

2. The mode among the lis t is highlighted in turn each t ime is pressed.

You can switch the mode with or while the mode menu is displayed.
Note
• The Adjustme nt menu and the Mode menu cannot be displayed at the s ame time.
• You can disable a specic mode to be s elected. For more information, see “3-1. Enabling/ Disabling Mode Selection”
(page 31).