Eizo CG303W - page 12

2. Installation

4 The <Display Setup> menu will appear in the middle of the screen. Press the

buttons to select "Dual Display" and then press .

Displaying 10-bit color signals

10-bit color signals can be displayed.

How to set

1 Connect the [SIGNAL1] signal input connector and the computer using the

[DD200DL-BK] signal cable.

After connecting the cable connector s, tighten the screws of the connectors to secure the coupling.

Connectors on the PC Signal cable Connectors on the monitor

Signal cable (DD200DL-BK) SIGNAL1

2 Hold down the button and press the button.

3 The <Display Setup> menu will appear in the middle of the screen. Press the

buttons to select "Single Display" and then press .

4 The <Signal Selection> menu will appear. Press the buttons to select

"Single Link/10bit", and press .

Contents

Main [Location of the Caution Statements] Notice for this monitor Cleaning To use the monitor comfortably CONTENTS 1. Introduction 1-1. Features CAUTION Be careful of the following points when using the monitor hood. 1. Introduction 1-2. Buttons and Indicators *ScreenManager is an EIZO's nickname of the Adjust ment menu. 1-3. Utility Disk Disk contents and software overview To use ColorNavigator 2. Installation 2. Installation 2-1. Setting Screen Resolution Compatible Resolutions/Frequencies The monitor supports the following resolutions. Setting Resolution 2-2. Environmental Settings Displaying Two Screens Simultaneously 1 2 3 Page 2-3. Making Use of USB (Universal Serial Bus) 1 2 3 3. Screen Adjustment and Settings 3-1. Basic Operation and Functions 1 2 3 Functions 3-2. Color Adjustment Simple Adjustment [FineContrast mode] Advanced Adjustments [Adjustment menu] Adjustment Items 3. Screen Adjustment and Settings Adjustment Contents Menu Function Descriptions Adjustable range 3-3. Power-save Setup [Power Saving System] [Power Resumption Procedure] 3-4. Off Timer [Power Resumption Procedure] 3-5. Locking the Settings [How to lock] [How to unlock] 3-6. Power Indicator Setting 3-7. Displaying Lower Resolutions 1 2 3 3-8. Setting the Orientation of the Adjustment Menu 3-9. Displaying EIZO Logo [To undisplay] [To display] 4. Troubleshooting * 4. Troubleshooting Problems Possible cause and remedy 5. Reference 5-1. Attaching an Arm Use the screws that hold the monitor and stand together for installation. Setup Procedure 1 5-2. Specications Dimensions Default settings Pin Assignment DVI-D Connector SIGNAL1 : Applicable to DualLink Pin No. Signal Pin No. Signal Pin No. Signal SIGNAL2 : Applicable to SingleLink only Pin No. Signal Pin No. Signal Pin No. Signal USB Port 5-3. Glossary FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice HinweiseHinweise zur Auswahl des richtigen Schwenkarms fr Ihren Monitor LIMITED WARRANTY LIMITED WARRANTY BEGRENZTE GARANTIE GARANTIE LIMITE GARANTA LIMITADA GARANZIA LIMITATA BEGRNSAD GARANTI