22
3. Screen Adjustment and Settings
3 Set the brightness of the black area surrounding the displayed image.
Set the <Border Intensity>.
In the "Enlarge" mode or "Full Screen" mode, the outer area (border) is usua lly black. Select <BorderIntensity>
in the <Others> menu and adjust by using .
3-8. Setting the Orientation of the Adjustment Menu
The orientation of the Adjustment menu can be changed.
[Procedure]
1. Select <Menu Settings> in the ScreenManager <O thers> menu.
2. Select <Orientation> in the <Menu Settings> menu.
3. Use to select between "Portrait" and "Landscape".
4. When selecting “Portrait”, turn t he monitor screen 90° in clockwise direction.
NOTE
• Be sure to t urn the monitor screen after pulling up t he screen to the uppermost position of the stand and sett ing the
screen tilted upward.
Tips
• If you use the monit or with "Portrait" position, the set ting may be required to change de pending on the graphics boa rd
used in your PC. Refer to the manual of the graph ics board for details.
3-9. Displaying EIZO Logo
When switching on the power button on the front control panel, t he EIZO logo is displayed for a while. If you
desire to display or undisplay this logo, use this function. ( Default is logo appearing.)

[To undisplay]

1. Press to turn off the unit.
2. Press again while pressing .
The EIZO logo does not appear on the screen.

[To display]

1. Press to turn off the unit.
2. Press again while pressing .
The EIZO logo appear on the screen.
Border