6
1. Introduction
1. Introduction
Thank you very much for choosing an EIZO Color Monitor.

1-1. Features

• 29.8 inch class wide screen format LCD
• Wide color gamut of 98% of Adobe RGB
• WQXGA (2560 × 1600) display compliant
• HDCP signal (SIGNAL2) compliant
• Dual-display compliant by introducing dual-input system (DVI-D × 2 con nectors)
• DVI digital input (TMDS) compliant
• Horizontal scan frequency: 26 - 100 kHz
• Vertical scan frequency: 29.5 - 30.5Hz, 59 - 61Hz (VGA TEXT: 69 - 71 Hz)
• Resolution: 2560 dots × 1600 lines
• Compatible with frame synchronization mode*1 (29.5 - 30.5Hz, 59 - 61Hz)
• Smoothing (soft - sharp) function
• The provided "ColorNavigator" calibration software enables you to calibrate monitor characte ristics and
generate ICC proles (for Windows) and Apple ColorSync proles (for Macintosh) (refer to the EIZO LCD
Utility Disk)
• FineContrast modes, to select the most suitable mode for screen display
• Height adjustable stand
• Portrait/Landscape display available (rotate 90 degrees clockwise)
• Attaching the "Adjustment Certicate" to describe the grayscale a nd uniformity characterist ics of the
monitor individually
• Monitor hood attached
• Color Vision Deciency Simulation Software "UniColor Pro" supported
(This software can be downloaded from ht tp://www.eizo.com)
*1 Compatible frequency differs d epending on your graphics board.

CAUTION

Be careful of the following points when using the monitor hood.
• Do not carr y the monitor with the hood atta ched.
While carrying the mon itor, the hood may fall or slip off, which may result in injur y or equipment
damage.
• Close the open /close cover until it contacts the stopper.
If the cover is not closed properly, the ventilation slots on the monitor wil l be covered and proper
airow will be prevented. This may cau se overheating inside the monitor and may re sult in re, electric
shock, or equipment damage.
• Do not place any objects o n the hood.
If the hood falls or slips off or the monitor falls over, it may result i n injury or equipment damage.
• Do not rotate th e monitor into the portrait position.
Doing so may cause the hood to slip off, which may result in i njury or equipment damage.