46 Chapter6Reference
Chapter 6 Reference

6-1. Attaching the Optional Arm

An optional arm (or an optional stand) can be at tached by removing the stand section. Please refer to our web site
for the corresponding optional ar m (or optional stand). http://www.eizo.com
Attention
• W hen attaching an arm or s tand, follow the instruction s of their User’s Manual.
• W hen using another manufactu rer’s arm or stand, conr m the following in advance and select one confor ming to the VESA
standard.
- Clea rance between the screw holes: 100 mm × 100 mm
- T hickness of plate: 2.6 mm
- St rong enough to support weight of the monitor u nit (except the stand) and attachme nts such as cables.
• W hen using another manufactu rer’s arm or stand, use the screws a s described below.
- FlexSt and2: Screws xing the stan d to the monitor
- TriSt and2: Screws supplied with this prod uct (M4 × 12 mm)
• W hen using an arm or stand, at tach it to meet the following tilt angles of the mon itor.
- Up 45˚, down 45˚ (horizontal dis play, and vertical display rotated 90 degrees clock wise)
• Con nect the cables after attach ing an arm or stand.
• Do not move the re moved stand up and down. Doing so may result in i njury or device damage.
• The mo nitor and arm or stand are heav y. Dropping them may result in injur y or equipment damage.
• W hen setting the monitor to the por trait style, turn t he monitor screen 90˚ in clockwise di rection.

Procedure

1. Lay the LCD monitor on a soft cloth spread over on a stable surface with the

panel surface facing down.

2.

Remove the stand.

Using a screwdriver, loosen the screws securing the u nit and the stand (FlexStand2: four positions, TriStand2:
three positions).

3.

Attach the arm or stand to the monitor.

Secure the monitor to the arm or st and using the screws specied in the User’s Manual of the arm or stand .