52 Chapter6Reference
●To set input signal selection
Setting Function
Auto Themonitorrecognizestheconnec torthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavin gmode,themonitorautomatically
displaysanothersignal.
Manual Themonitordisplaysthesignalfromthesele ctedconnectordespitethesignalinput.Sele ct
theinputsignalfordisplayusingthe operationbut ton.
Procedure
1. Choose “ Monitor Settings” from the Adjustment menu, and press .
2. Choose “I nput Signal” from “Monitor Settings”, and press .
3. Select “Auto” or “Manual” with or .
4. Pre ss to exit.
Note
• If you select “Auto”, the monitor enters t he power saving mode after all the PCs have ente red the power saving mode or
have been switched off.

6-5. Making Use of USB (Universal Serial Bus)

This monitor has a USB hub. It works as a USB hub when connected to a USB-compatible PC, allowing t he
connection of peripheral USB devices.
●Required System Environment
• A PC equipped with a USB port
• Windows 2000 / XP / Vista / 7 / 8 or Mac OS 9.2.2 and Mac OS X 10.2 or later
• USB cable (commercially available product)
Attention
• Th is monitor may not work depending on PC, OS or per ipheral devices to be used. For USB compatibilit y of peripheral
devices, contact their manu facturers.
• W hen the monitor is in power saving mode, device s connected to the USB downstre am port will still work. The refore,
power consumption of the monitor varie s with connected devices even in t he power saving mode.
• W hen the main power of the monitor is Off, a device c onnected to the USB downstrea m port will not operate.