English
2. Plug the power cord into the power connector on the rear of the monitor. Then, plug the other end of the cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may cause in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
3. Turn on the monitor’s main power and then switch on the PC's power.
The monitor’s power indicator will light up (blue).
If an image does not appear, refer to the “6. TROUBLESHOOTING” (p.30) for advice.
Turn on the monitor’s main power and then switch on the PC's power.
4. Install the TouchWare with following the instructions on the CD- ROM.
NOTE
• Please carefully read the readme file of TouchWare at the installation.
5.Connect the upstream port of the monitor to the downstream port of the USB compliant by using the USB cable.
After connecting the USB cable, the USB function can be set up automatically.
14 2. CABLE CONNECTION