English

EIZO Logo disappearing function

When switching on the Power Switch on the control panel, the EIZO logo is displyed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.)

[To undisplay]

(1)Switch off the monitor’s power by the Power switch on the control panel.

(2)Hold down the Enter button once again and turn the power back on.

[To display again]

(1)Switch off the monitor’s power by the Power switch.

(2)Hold down the Enter button once again and turn the power back on.

Automatically selecting the input signal function

The monitor will automatically detect the inputted signal of either the connection for display.

Connecting two PCs to the monitor

When the one computer is switched off or entering the power saving mode, the monitor will automatically dislay the other signal.

Use the ScreenManager to switch the input selection to manual.

[Procedure]

(1)Select <Input Signal> in the <Others> menu.

(2)Select “Manual”.

20 3. ScreenManager