English
5. ATTACHING A STAND
The LCD monitor can be used with other stand by removing the tilt stand and attaching the stand to the LCD monitor.
NOTE
•If you will use the other stand, confirm the followings to the manufacturers before selecting.
-Hole spacing on the stand mounting: 75 mm x 75 mm (VESA compliant)
-Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as a cable
-TÜV/GS approved stand
•Please connect cables after attaching a stand.
Setup Procedure
1. Lay the LCD monitor down. Do not scratch the panel.
2. Remove the tilt stand by loosening the screws (2 pcs of M4 x 10 mm).
3. Attach a stand to the LCD monitor securely.
stand
4 Mounting Screws (enclosed): M4 x 12 mm
5. ATTACHING A STAND 29