English

 

 

Problems

Points to check with possible solutions

3. Display position is incorrect.

† Adjust the image position using the <Position>

 

(p.23)

†The two display modes, VGA 720 x 400 (70 Hz) and 320 x 200 (70 Hz), have the same signal timings. Using this adjustment selects the appropriate display mode. (This function effects only when the resolution is VGA 720 x 400 (70 Hz) or 320 x 200 (70 Hz).

†If the problem persists, use the graphics board’s utility software to change the display position if available.

4.Vertical bars of distortion appear. † Decrease the vertical bars using the <Clock>. (p.22)

5. Horizontal bars of distortion

† Decrease the horizontal bars using the <Phase>.

appear.

(p.22)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.

Letters and lines appear blurred.

† Switch the <Smoothing> mode. (p.23)

 

 

 

7.

The screen is too bright or too

† Adjust the <Contrast and brightness> (The

 

dark.

baklight of the LCD monitor has a fixed life

 

 

span. When the screen becomes dark or begins

 

 

to flicker, please consult your dealer.)

8.

Afterimages appear.

† When the screen image is changed after

 

 

displaying the same image for a long period, an

 

 

afterimage may appear. The “Afterimage” can

 

 

be removed gradually by changing the displayed

 

 

image. Use the “Off Timer” function and avoid

 

 

keeping the screen on all the time.(p.19)

 

 

 

9.

The screen has defective pixels

† This is due to the characteristics of the panel

 

(e.g. slightly light or dark).

itself, and not the LCD product.

6. TROUBLESHOOTING 31