English

4-2. Color Adjustment

The <Color> menu in the ScreenManager enables to change the color of the screen. By using the <Color Mode>, the adjustment mode can be selected from <Custom mode> (to adjust the color settings according to your preference) and <sRGB> mode.

In the analog input, perform the “Range Adjustment” (p.23) before making the color adjustments.

NOTE

Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. (Allow the monitor to warm up for at least 20 minutes before making adjustments.)

Performing the <Reset> of the <Color> menu returns the color settings to the default settings

The values shown in percentages represent the current level within the specific adjustment. They are available only as a reference tool. (To create an uniform white or black screen, the percentages for each will probably not be the same.)

Adjustment Contents

 

Menu

Color Mode

 

Function Descriptions

 

Adjustable range

 

 

Custom

sRGB

 

 

 

 

 

 

Brightness

 

To set the brightness of the

 

0 100%

 

 

 

 

 

screen

 

 

 

 

 

 

 

 

 

 

 

 

Temperature

-

 

To set the color temperature

 

4,000 10,000 K

 

(p.41)

 

 

 

 

 

 

in 500 K increments

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(including 9,300 K).

 

 

 

 

 

 

 

 

Default setting is off

 

 

 

 

 

 

 

 

(normal white)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

 

 

 

 

 

 

 

 

The values shown in the Kelvin are available only as a

 

 

 

 

 

reference tool.

 

 

 

 

 

 

Setting the temperature under 4,000 K or over 10,000

 

 

 

 

 

K invalidates the color temperature setting. (The color

 

 

 

 

 

temperature’s setting turns “OFF”.)

 

Gamma

-

 

To set the gamma value

 

1.8 2.6

 

(p.42)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If setting the gamma value, the using the monitor in

 

 

 

 

 

the digital signal input is recommended.

 

 

 

 

 

If using the monitor in the analog input signal, set the

 

 

 

 

 

gamma value from 1.8 to 2.2.

 

 

 

 

 

 

 

 

 

 

4. ADJUSTMENT 25