(4)Plug the other end of the cable into the video connector on the rear of the PC.
Standard PC graphics board
pin
| Standard PC | |||
| pin |
| ||
|
| graphics board | ||
|
|
| ||
| Signal Cable (enclosed) |
| ||
Macintosh |
|
| ||
|
|
| ||
| pin |
|
| |
| Macintosh G3 | |||
| pin |
| ||
|
| (Blue & White) | ||
|
|
| ||
| Signal Cable (enclosed) |
| ||
|
| |||
pin | Macintosh | |||
pin | pin | |||
| ||||
Signal Cable (enclosed) | Macintosh Adapter |
(5)Plug the power cord into the power connector on the rear of the LCD monitor.
(6)Replacing the connector cover and the rear cover.
a)Insert the rear cover into the inlets at the bottom of the stand.
b)To close easily, the LCD monitor should be tilted forward. Attach the connector cover to the rear panel of the LCD.
2
1
(7)Plug the other end of the power cord into a power outlet.
(8)Turn on the monitor’s main power and then switch on the PC power. Whenever you finish your operation, turn off the PC and the monitor.
12 1 INSTALLATION