![](/images/backgrounds/140610/140610-5532x1.png)
Function
1)Select the “Off Timer” icon and press the Enter button to display “Off Timer” select menu.
2)Select “Enable” and press the enter button.
3)Press the right/left key to adjust how long (1 to 23 hours) the monitor should be in the “On Period”. Then, press the enter button to return to the “others” menu.
4)Select the “Exit” icon and push the Enter button to exit the ScreenManager.
Advance notice (Beep and LED flashing green) will be given 15 minutes before the monitor will automatically turn off and enter the “Power Off” modes .
·“Off Timer” function works while Power Manager is active, but there would be no advanced mode before the monitor's power’s switching off.
| To Delay Entering Power Off | ||
| To delay entering the “Power Off” mode, press the | ||
| power button on the front panel located to the left of | ||
| the LED light during the advance notice period. The | ||
| monitor will continue to operate for an additional 90 | ||
| minutes. There will be another advance notice for | ||
| 15 minutes as described. Delayed entrance into the | ||
| “Power Off” period can be extended as many times | ||
| as desired. |
|
|
|
|
| |
Beep | Turns the beeper on or off. | ||
| Short beep | · | ScreenManager item selected. |
|
| · | ScreenManager parameter adjusted |
|
|
| to minimum or maximum limit. |
|
| · | Input signal selection button pressed. |
| Long beep | · | Auto Adjustment button pressed. |
|
| · | ScreenManager |
|
|
|
|
| Four short | · | Monitor not connected correctly. |
| beeps | · | PC turned off. |
|
| · | Monitor received unsupported signal |
|
|
| frequency. |
|
|
|
|
| Two short | · | Monitor is in the advance notice mode |
| beeps |
| of the Off Timer. The power will be |
| every |
| off within fifteen minutes. |
| fifteen |
|
|
| seconds |
|
|
|
|
|
|
32 2 USING THE SCREENMANAGER