|
|
| Function |
|
| E | |
|
|
|
|
|
|
| |
| Border | Changes the brightness of the black area | |||||
|
| ||||||
| |||||||
| Intensity | surrounding the displayed image. | |||||
|
| · This adjustment is disable in full screen mode. | |||||
|
|
|
|
| |||
|
|
| What is the “Border Intensity” function? |
| |||
|
|
| With lower resolutions of (640 x 480, 800 x 600, |
| |||
|
|
| 1024 x 768, etc.) the image is displayed at the |
| |||
|
|
| center of the screen and the outer area (border) is |
| |||
|
|
| usually black. The “Border Intensity” function can |
| |||
|
|
| set the brightness of this border area to any |
| |||
|
|
| brightness level that maybe desired. |
| |||
|
|
|
| ||||
|
|
|
|
|
|
|
|
| Input Priority Selects which PC will have priority to control the | ||||||
|
| monitor when utilizing two PCs. | |||||
|
|
|
|
|
| ||
|
|
| Priority | Performance | |||
|
|
| setting |
|
|
|
|
|
|
|
| If signals from both inputs are present, the | |||
|
|
|
| monitor gives preference to Signal 1 for the | |||
|
|
| Signal 1 | cases shown below: | |||
|
|
| • | When the power of the monitor is turned | |||
|
|
|
|
| ON (see note 1). | ||
|
|
|
| • | When the signal input to Signal 1 is | ||
|
|
|
|
| changed even if active input was Signal 2. |
If signals from both inputs are present, the monitor gives preference to Signal 2 for the
cases shown below:
Signal 2 • When the power of the monitor is turned ON (see note 1).
•When the signal input to Signal 2 is changed even if active input was Signal 1.
The monitor will not detect signals
Manual automatically in this mode. Select the active input by pressing the input signal selection
button on the monitor’s front panel.
Off Timer | Automatically Turns off the Monitor |
| |
| What is Off Timer? |
The Off Timer function allows the user to set the time in which the monitor will be in operation, called the “On Period” and automatically shifts the operation into the “Power Off” mode when the set “On Period” expires. The Off Timer function was created to reduce afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use.
2 | USING THE SCREENMANAGER 31 |